Transform Your Mercedes-Benz Sprinter Van in Charlotte, NC
Hendrick Motors of Charlotte is Charlotte's destination for Mercedes-Benz Sprinter van accessories, upgrades, and custom upfitting. Whether you're building a capable overlanding rig, chasing backcountry trails, or simply want a cleaner and more functional van for everyday life — our Sprinter specialists work directly with you to design and install a build that fits your vision.
You can bring your existing Sprinter van to us, or purchase a new Sprinter and have it customized before you ever leave the lot. Either way, you'll work one-on-one with a knowledgeable Sprinter specialist at our Charlotte dealership to plan a build around your needs, your budget, and your lifestyle.
We install parts from Agile Off-Road and Owl Off-Road — two of the most respected names in the Sprinter customization industry — so you can be confident every component is purpose-built for your van and professionally installed.
Located at 5201 E. Independence Blvd, Charlotte, NC 28212. Proudly serving Sprinter owners throughout Charlotte, Pineville, Matthews, Greater Indian Trail, Huntersville, Concord, and the greater Mecklenburg County area.
Sprinter Van Accessories & Upgrades We Offer
Suspension Lift Kits — Agile Off-Road RIP Kit
A suspension upgrade gives your Sprinter improved ride quality, better off-road composure, and a more capable stance on and off pavement. We install the Agile Off-Road RIP Kit — a Ride Improvement Package engineered specifically for the Mercedes-Benz Sprinter platform.
The Agile RIP Kit is built around FOX shocks tuned specifically for the Sprinter's geometry and weight distribution, paired with custom-rate leaf spring packs. The result is approximately 2 inches of lift along with genuine improvements in ride stability, damping control, and handling — whether you're loaded down on the highway or navigating rocky terrain. Unlike generic spacer lifts, the Agile system is weight-specific and precision-tuned to your van's actual rear axle load and drivetrain configuration.
RIP Kits are available for both 2WD and 4WD/AWD Sprinter models, covering the NCV3 (2007–2018) and VS30 (2019+) generations, including 2500 and 3500 chassis. Installation is entirely bolt-on — no fabrication required. Your Sprinter specialist will confirm the correct kit configuration for your specific van during your consultation.
- FOX shocks tuned for Sprinter geometry and payload
- Approximately 2 inches of lift as a byproduct of ride improvement
- Custom-rate rear leaf spring packs
- Available for 2WD and 4WD/AWD configurations
- Compatible with NCV3 (2007–2018) and VS30 (2019+) Sprinter 2500 and 3500
- Bolt-on installation — no fabrication needed
Compatibility: Mercedes-Benz Sprinter 2500 (2WD and 4WD/4x4), NCV3 Second Generation (2007–2018), VS30 Third Generation (2019+), and 2023 Sprinter.
Note: VS30 Sprinters (2019+) require Agile No-Rub fenders for tires larger than 245/70-R17. Aftermarket cone-seat lug bolts are required and are not included.
Wheels & Tires — Agile Off-Road Overlander HD (SKU: AOR780)
Upgrading your Sprinter's wheels is one of the most impactful modifications you can make — and the Agile Off-Road Overlander HD is built specifically for the Mercedes-Benz Sprinter platform. Every specification, from the 17×8 size and +32mm offset to the dual-valve system, is engineered around how Sprinters are actually driven and built.
The Overlander HD uses Cast-Flow-Formed construction — a process that combines the shape flexibility of casting with the molecular strength of flow-forming. The result is a wheel rated to carry up to 4,215 lbs per wheel, weighing just 30.5 lbs. The Y-spoke design and enhanced lip ring distribute stress evenly across the structure for added durability. An elevated bead safety hump and gnarled bead seat keep your tires securely mounted even when you air down for off-road traction — a critical feature for trail driving on dirt roads and backcountry terrain.
When paired with the Agile RIP suspension kit, no wheel spacers are required, making installation clean and straightforward. The dual-valve system lets you quickly adjust tire pressure on the fly — lower for traction on dirt and rock, higher for highway efficiency — and it accepts your factory TPMS sensors so you retain your tire pressure warning system.
Available in three finishes: Matte Black, Matte Grey with Matte Black Lip, and Matte Bronze with Matte Black Lip.
- Cast-Flow-Formed construction — lightweight and strong
- Max load rating: 4,215 lbs per wheel
- Size: 17×8, +32mm offset
- Weight: 30.5 lbs per wheel
- Dual-valve system for rapid tire pressure adjustment; accepts OEM TPMS sensors
- No wheel spacers required when paired with Agile 4WD RIP Kit
- Y-spoke design and enhanced lip ring for structural strength
- Elevated bead safety hump and gnarled bead seat for tire retention during air-down use
- Independently tested for durability
- Finishes: Matte Black, Matte Grey w/ Matte Black Lip, Matte Bronze w/ Matte Black Lip
Winch Bumper — Agile Off-Road Telluride (SKU: AO-BUM-MB)
The Agile Off-Road Telluride is a front winch mount bumper built specifically for the Mercedes-Benz Sprinter VS30 (2019+), covering 1500, 2500, and 3500 models. It adds serious off-road recovery capability without compromising the Sprinter's factory fit, finish, or safety systems — a combination that's genuinely rare in the winch bumper market.
The winch plate mounts directly to the Sprinter's frame horns, leaving critical components like the radiator shroud and transmission cooler completely undisturbed. Two integrated recovery points give you solid anchor options on the trail. Every factory safety system — including adaptive cruise control, lane keep assist, 360° camera, and parking sensors — continues to operate normally after installation.
The Telluride is designed specifically to accept Warn 12K winches, pairing your Sprinter with one of the most trusted names in off-road recovery. Installation requires only a few simple cuts using the included templates, and the factory bumper cover is retained — preserving the Sprinter's original contours. An included lower brace prevents bumper cover sag even after extended off-road use.
For added capability, the Telluride is compatible with the Agile FERRATA Light Bar (sold separately), which mounts directly to the winch plate and is designed to support two Baja Designs LP6 or LP9 auxiliary lights — eliminating the bouncing beam problem common with roof-mounted setups.
- Front winch mount bumper — factory fit and finish retained
- Two integrated recovery points
- Winch plate mounts to frame horns — radiator shroud and transmission cooler undisturbed
- All factory safety systems remain operational post-installation (adaptive cruise, lane keep assist, 360° camera, parking sensors)
- Designed for Warn 12K winches
- Bolt-on with simple cuts only — templates included
- Lower brace included to prevent bumper cover sag
- Compatible with Agile FERRATA Light Bar (sold separately)
Compatibility: Mercedes-Benz Sprinter 1500, 2500, and 3500 — VS30 Third Generation (2019+). Available in two fitment configurations: 2019–2024 Sprinter and 2025+ Sprinter, as the distronic sensor location differs between model years. Your Sprinter specialist will confirm the correct version for your van before installation.
Note: Winch, fairlead, flatlink, and lights are not included and are sold separately. Ask your Sprinter specialist for compatible accessory recommendations.
Rear Tire Carrier — Agile Off-Road NCV3 Rear Door Tire Carrier (SKU: AOR00033)
The best place to store your Sprinter's spare tire isn't underneath the van — it's on the rear door. The Agile Off-Road NCV3 Rear Door Tire Carrier moves your spare up and out of harm's way, keeps it clean and accessible, and allows you to carry a tire larger than the factory spare. It also frees up the undervan space for higher-value accessories like auxiliary fuel tanks or freshwater systems — a significant advantage for any serious van build.
Designed for the Mercedes-Benz Sprinter 2500 and 3500 (2WD and 4WD), NCV3 generation (2007–2018) only, this carrier bolts on without any modifications to the body, door, or door hinges. Steel construction and billet hardware keep it lightweight and corrosion-resistant, while the textured black powder-coat finish is built to hold up on the road and the trail. A built-in locating lug pin makes mounting your tire to the carrier quick and secure.
The carrier retains the rear door's full 180° range of motion with a factory wheel and tire, is rated to 100 lbs, and fits tires 275mm and larger. At just 20 lbs, it adds minimal weight while substantially expanding your Sprinter's capability and storage options.
Available with hardware packages for factory steel wheels, factory alloy wheels, aftermarket alloy wheels, locking aftermarket alloy wheels, and a 3500 Dually wheel adapter. Your Sprinter specialist will confirm which configuration fits your setup.
- Mounts to rear driver-side door — no body, door, or hinge modifications required
- 100 lb weight capacity
- Fits tires 275mm and larger
- Weighs 20 lbs
- Full 180° door range of motion retained with factory wheel and tire
- Steel construction with billet hardware — lightweight and corrosion-resistant
- Textured black powder-coat finish
- Locating lug pin for easier tire mounting
- Frees undervan space for auxiliary fuel or water tank installations
- Hardware options: factory steel, factory alloy, aftermarket alloy, locking aftermarket alloy, 3500 Dually adapter
Compatibility: Mercedes-Benz Sprinter 2500 and 3500 (2WD and 4WD) — NCV3 Second Generation (2007–2018) only.
Important: This tire carrier must not be installed on any vehicle without a retaining arm or stop mechanism that limits rear door swing to approximately 90 degrees (factory angle). If the door is allowed to open beyond this point, the carrier may contact the rear window or body panel, causing serious damage. Please confirm proper fitment with your Sprinter specialist prior to installation.
Roof Racks
A roof rack opens up a new dimension of storage and utility for your Sprinter. Carry overland gear, solar panels, kayaks, lumber, rooftop tents, or lighting equipment — all above the roofline and out of your cargo space. Our team installs rack systems designed specifically for the Sprinter platform, ensuring proper fit and secure mounting for whatever load you plan to carry.
And More
Our Sprinter accessory and upfitting program continues to grow. Additional upgrade options available through consultation include:
- Side steps and rock sliders
- Skid plates and underbody protection
- Lighting upgrades
- Snorkels and performance components
- Recovery gear and winch mounts
- Interior storage and organization
Ask your Sprinter specialist about the full range of parts and configurations we can source and install.
How Does the Sprinter Upfitting Process Work at Hendrick Motors of Charlotte?
Working with Hendrick Motors of Charlotte on your Sprinter build is straightforward from start to finish.
- Request a Consultation — Fill out the form on this page to connect with our Sprinter specialist. Tell us what you're building and what you're looking to accomplish.
- Design Your Build — We walk through your options together, matching parts to your van's configuration, your intended use, and your budget. No pressure, no guesswork.
- Schedule Installation — Once your build plan is confirmed, we schedule installation at our Charlotte service facility at 5201 E. Independence Blvd, Charlotte, NC 28212.
- Quality Review — Before your van is returned, every installed component is inspected to confirm proper fitment, torque, and function.
- Pick Up Your Upgraded Sprinter — Drive away in a van that's been purpose-built for how you actually use it.
Why Choose Hendrick Motors of Charlotte for Sprinter Van Accessories & Upfitting?
Hendrick Motors of Charlotte is an authorized Mercedes-Benz dealership with a dedicated Sprinter service team and deep expertise in the Sprinter platform. Here's what sets our upfitting program apart from independent shops and aftermarket installers:
- Brand-Name Parts You Can Trust: We source and install from Agile Off-Road and Owl Off-Road — two brands that have been tested and trusted by serious Sprinter builders across the country. Every product we install is purpose-built for the Mercedes-Benz Sprinter platform.
- Expert Consultation: You work directly with a knowledgeable Sprinter specialist, not a generic service advisor. We understand the platform, the products, and the build process.
- Professional Installation: All work is performed at our authorized Mercedes-Benz dealership by experienced technicians using proper tooling and fitment-specific components.
- Bring Your Van or Buy New: Whether you own an existing Sprinter or are purchasing a new one from us, we can develop a custom build plan for your vehicle.
- One Location for Everything: Consultation, customization, installation, and ongoing service all happen at 5201 E. Independence Blvd, Charlotte, NC 28212.
- Serving the Greater Charlotte Area: We work with Sprinter owners throughout Charlotte, Pineville, Matthews, Greater Indian Trail, Huntersville, Concord, and Mecklenburg County.
Frequently Asked Questions: Sprinter Van Accessories & Upfitting in Charlotte, NC
Can I bring my existing Sprinter van in for accessories and upgrades?
Yes. You do not need to purchase a new van from us. Bring your current Sprinter — any compatible year and configuration — and our team will assess your van and recommend the right accessories and upgrades for your goals.
Do you offer upfitting on new Sprinters purchased from Hendrick Motors of Charlotte?
Yes. If you are purchasing a new Sprinter from us, we can build a customization plan as part of your purchase so your van is ready to go from day one.
What brands of accessories do you install?
We install parts from Agile Off-Road and Owl Off-Road — two well-established leaders in the Sprinter customization and overland accessory space. Both brands engineer their products specifically for the Mercedes-Benz Sprinter platform.
Do Agile Off-Road RIP Kits work on both 2WD and 4WD Sprinters?
Yes. Agile Off-Road RIP Kits are available for both 2WD and 4WD/AWD Mercedes-Benz Sprinter 2500 and 3500 models, covering NCV3 (2007–2018) and VS30 (2019+) generations. During your consultation, we will confirm the correct kit configuration for your specific van's drivetrain and rear axle weight.
What is the difference between the NCV3 and VS30 Sprinter generations?
The NCV3 refers to second-generation Mercedes-Benz Sprinter vans produced from 2007 through 2018. The VS30 refers to the third generation, produced from 2019 onward. Many accessories — including the Agile rear door tire carrier and the Telluride winch bumper — are generation-specific. Your Sprinter specialist will confirm compatibility for your van before any parts are ordered or installed.
Will adding accessories affect my Mercedes-Benz warranty?
This depends on the specific modification. During your consultation, our team will discuss how each upgrade applies to your vehicle and its warranty coverage. We are committed to full transparency throughout the process so you can make an informed decision before any work begins.
Does the Agile Telluride winch bumper work on 2025 Sprinters?
Yes. The Telluride is available in two fitment configurations — one for 2019–2024 Sprinters and one for 2025+ Sprinters — because the distronic sensor location differs between model years. Your Sprinter specialist will identify the correct version for your van before ordering.
Is the Agile rear door tire carrier compatible with my VS30 (2019+) Sprinter?
No. The Agile Off-Road NCV3 Rear Door Tire Carrier (SKU: AOR00033) is designed for the NCV3 second-generation Sprinter (2007–2018) only. If you have a VS30 (2019+) Sprinter and are looking for a rear carrier solution, ask your Sprinter specialist about compatible options for your generation.
How long does Sprinter upfitting take?
Timelines vary based on the scope of your build. Single-accessory installations such as a roof rack or wheel upgrade typically take a day or less. More involved builds combining suspension, wheels, a bumper, and a rear carrier may require several days. We provide a detailed timeline during your consultation before any work is scheduled.
Do you offer financing for Sprinter accessories and upfitting?
Yes. Hendrick Motors of Charlotte offers flexible service financing options, including our Service Now, Pay Later program, which allows you to manage upfitting costs with greater convenience. Terms and conditions apply — see dealer for details.
Request a Sprinter Upfitting Consultation at Hendrick Motors of Charlotte
Our Sprinter specialist team is ready to help you design and build the right accessory package for your van. Fill out the form below and we will reach out to discuss your project, answer your questions, and get you scheduled.
Visit us at 5201 E. Independence Blvd, Charlotte, NC 28212 or call us at (980) 245-4662.
We proudly serve Sprinter owners throughout Charlotte, Pineville, Matthews, Greater Indian Trail, Huntersville, Concord, and the greater Mecklenburg County area.
Request a Sprinter Upfitting Consultation
* Indicates a required field
AdChoices